Pneumatic Pressure
Not with the Shield and Shield+, the compressor is completely integrated in the machine. For the E-lam you can order a separate external compressor or use...
Sun, 22 Nov, 2015 at 10:18 AM
On the top-right of the laminator you have an easy to use control button to increase or decrease the air-pressure. On the back you find a very clear pres...
Sun, 22 Nov, 2015 at 10:38 AM
For the E-lam, you can. No problem.
With the Shield and Shield+, you can’t. In order to guarantee the correct pressure of the Shield, we need to know ex...
Sun, 22 Nov, 2015 at 10:22 AM
Yes. We recommend to check the oil level every 6 months and untap any water when needed.
Sun, 22 Nov, 2015 at 10:22 AM
We recommend to you a general pressure setting around 5-6 Bar. We are working with vinyl manufacturers to check and adjust current advised pressure settin...
Sun, 22 Nov, 2015 at 10:23 AM
When you turn off the compressor, air pressure will slowly be removed. Don’t worry about damaging the laminating rollers. A small feather system makes sur...
Sun, 22 Nov, 2015 at 10:23 AM